Hollow Wall Grab Bar Anchors
Hollow Wall Grab Bar Anchors
Grab Bar Fastener Installation with “The Beast”
Compare_______________________________________________
|
|
Moen Drywall, Hollow Wall Grab Bar Anchors $24.50 |
_______________________________________________________
Compare_______________________________________________
|
|
Bobrick B-251-4 WingIt Grab Bar Fastener $58.41 Bobrick B-251-4 WingIt Grab Bar Fastener Bobrick offers over 750 products for public washroom facilities. Bobrick has developed a complete lines of washroom accessories as well as toilet partitions and related laminated plastic products. Bobrick B-251-4 WingIt Grab Bar Fastener Features: Corrosion-resistant stainless steel. Install all Bobrick Grab Bar Series without backing; no need to open and reconstruct walls. For walls with a min. of 5/8″ (16mm) thick painted or tiled drywall. Can also be used on 1/2″ (13mm) thick drywall with added finished wall material. Fastener will support 300-lb load exceeding all building code and governmental agency guidelines including ADA Accessibility Guidelines in the U.S.A. For 2-1/2″ and 3-1/2″ (65 and 90mm) or deeper hollow walls with finished wall surfaces 1/4″ to 1-1/2″ (6 to 38mm) thick. One fastener required for each flange. WingIt is a trademark of WingIt Innovations, LLC. |
|
|
Carex Textured Wall Grab Bar, 12 $22 Features of the Carex Textured Wall Grab Bar: Textured diamond knurled gripping area. Professional installation is required. |
|
|
Carex Textured Wall Grab Bar, 16 $25.52 Features of the Carex Textured Wall Grab Bar: Textured diamond knurled gripping area. Professional installation is required. |
|
|
Carex Textured Wall Grab Bar, 18 $27.14 Features of the Carex Textured Wall Grab Bar: Textured diamond knurled gripping area. Professional installation is required. |
|
|
Bobrick B-5806X12 Concealed Mounting with 12 Snap Flange Grab Bar $44.84 Bobrick B-5806X12 Concealed Mounting with 12″ Snap Flange Grab Bar Bobrick offers over 750 products for public washroom facilities. Bobrick has developed a complete lines of washroom accessories as well as toilet partitions and related laminated plastic products. Bobrick B-5806X12 Concealed Mounting with 12″ Snap Flange Grab Bar Features: Satin-finish 18-gauge type 304 stainless steel tubing 1-1/4″ (32mm) diameters. Bar passes through flange and is heliarc welded to form single structural unit. Cover snaps over mounting flange to conceal screws. Concealed mounting flange 1/8″ (3mm) thick stainless steel plate, 2″ W x 3-1/8″ H (50 x 80mm), with two screw holes for concealed anchors. Cover is 22-gauge (0.8mm) stainless steel with satin-finish, 3-1/4″ (85mm) dia. Grab bars that provide 1-1/2″ (38mm) clearance from the wall can support loads in excess of 900 pounds (408-kg) when properly installed. Meets ADA Accessibility Guidelines in U.S.A. All joints and supports are contour cut and welded. Concealed anchors and fasteners available as an optional accessory. Peened nonslip gripping surface available. |
|
|
Bobrick B-5806X18 Concealed Mounting with 18 Snap Flange Grab Bar $32.6 Bobrick B-5806X18 Concealed Mounting with 18″ Snap Flange Grab Bar Bobrick offers over 750 products for public washroom facilities. Bobrick has developed a complete lines of washroom accessories as well as toilet partitions and related laminated plastic products. Bobrick B-5806X18 Concealed Mounting with 18″ Snap Flange Grab Bar Features: Satin-finish 18-gauge type 304 stainless steel tubing 1-1/4″ (32mm) diameters. Bar passes through flange and is heliarc welded to form single structural unit. Cover snaps over mounting flange to conceal screws. Concealed mounting flange 1/8″ (3mm) thick stainless steel plate, 2″ W x 3-1/8″ H (50 x 80mm), with two screw holes for concealed anchors. Cover is 22-gauge (0.8mm) stainless steel with satin-finish, 3-1/4″ (85mm) dia. Grab bars that provide 1-1/2″ (38mm) clearance from the wall can support loads in excess of 900 pounds (408-kg) when properly installed. Meets ADA Accessibility Guidelines in U.S.A. All joints and supports are contour cut and welded. Concealed anchors and fasteners available as an optional accessory. Peened nonslip gripping surface available. |
|
|
Bobrick B-5806X30 Concealed Mounting with 30 Snap Flange Grab Bar $34.78 Bobrick B-5806X30 Concealed Mounting with 30″ Snap Flange Grab Bar Bobrick offers over 750 products for public washroom facilities. Bobrick has developed a complete lines of washroom accessories as well as toilet partitions and related laminated plastic products. Bobrick B-5806X30 Concealed Mounting with 30″ Snap Flange Grab Bar Features: Satin-finish 18-gauge type 304 stainless steel tubing 1-1/4″ (32mm) diameters. Bar passes through flange and is heliarc welded to form single structural unit. Cover snaps over mounting flange to conceal screws. Concealed mounting flange 1/8″ (3mm) thick stainless steel plate, 2″ W x 3-1/8″ H (50 x 80mm), with two screw holes for concealed anchors. Cover is 22-gauge (0.8mm) stainless steel with satin-finish, 3-1/4″ (85mm) dia. Grab bars that provide 1-1/2″ (38mm) clearance from the wall can support loads in excess of 900 pounds (408-kg) when properly installed. Meets ADA Accessibility Guidelines in U.S.A. All joints and supports are contour cut and welded. Concealed anchors and fasteners available as an optional accessory. Peened nonslip gripping surface available. |
|
|
Bobrick B-5806X36 Concealed Mounting with 36 Snap Flange Grab Bar $34.78 Bobrick B-5806X36 Concealed Mounting with 36″ Snap Flange Grab Bar Bobrick offers over 750 products for public washroom facilities. Bobrick has developed a complete lines of washroom accessories as well as toilet partitions and related laminated plastic products. Bobrick B-5806X36 Concealed Mounting with 36″ Snap Flange Grab Bar Features: Satin-finish 18-gauge type 304 stainless steel tubing 1-1/4″ (32mm) diameters. Bar passes through flange and is heliarc welded to form single structural unit. Cover snaps over mounting flange to conceal screws. Concealed mounting flange 1/8″ (3mm) thick stainless steel plate, 2″ W x 3-1/8″ H (50 x 80mm), with two screw holes for concealed anchors. Cover is 22-gauge (0.8mm) stainless steel with satin-finish, 3-1/4″ (85mm) dia. Grab bars that provide 1-1/2″ (38mm) clearance from the wall can support loads in excess of 900 pounds (408-kg) when properly installed. Meets ADA Accessibility Guidelines in U.S.A. All joints and supports are contour cut and welded. Concealed anchors and fasteners available as an optional accessory. Peened nonslip gripping surface available. |
|
|
Bobrick B-5806X42 Concealed Mounting with 42 Snap Flange Grab Bar $37.76 Bobrick B-5806X42 Concealed Mounting with 42″ Snap Flange Grab Bar Bobrick offers over 750 products for public washroom facilities. Bobrick has developed a complete lines of washroom accessories as well as toilet partitions and related laminated plastic products. Bobrick B-5806X42 Concealed Mounting with 42″ Snap Flange Grab Bar Features: Satin-finish 18-gauge type 304 stainless steel tubing 1-1/4″ (32mm) diameters. Bar passes through flange and is heliarc welded to form single structural unit. Cover snaps over mounting flange to conceal screws. Concealed mounting flange 1/8″ (3mm) thick stainless steel plate, 2″ W x 3-1/8″ H (50 x 80mm), with two screw holes for concealed anchors. Cover is 22-gauge (0.8mm) stainless steel with satin-finish, 3-1/4″ (85mm) dia. Grab bars that provide 1-1/2″ (38mm) clearance from the wall can support loads in excess of 900 pounds (408-kg) when properly installed. Meets ADA Accessibility Guidelines in U.S.A. All joints and supports are contour cut and welded. Concealed anchors and fasteners available as an optional accessory. Peened nonslip gripping surface available. |
|
|
Bobrick B-5806X48 Concealed Mounting with 48 Snap Flange Grab Bar $41.29 Bobrick B-5806X48 Concealed Mounting with 48″ Snap Flange Grab Bar Bobrick offers over 750 products for public washroom facilities. Bobrick has developed a complete lines of washroom accessories as well as toilet partitions and related laminated plastic products. Bobrick B-5806X48 Concealed Mounting with 48″ Snap Flange Grab Bar Features: Satin-finish 18-gauge type 304 stainless steel tubing 1-1/4″ (32mm) diameters. Bar passes through flange and is heliarc welded to form single structural unit. Cover snaps over mounting flange to conceal screws. Concealed mounting flange 1/8″ (3mm) thick stainless steel plate, 2″ W x 3-1/8″ H (50 x 80mm), with two screw holes for concealed anchors. Cover is 22-gauge (0.8mm) stainless steel with satin-finish, 3-1/4″ (85mm) dia. Grab bars that provide 1-1/2″ (38mm) clearance from the wall can support loads in excess of 900 pounds (408-kg) when properly installed. Meets ADA Accessibility Guidelines in U.S.A. All joints and supports are contour cut and welded. Concealed anchors and fasteners available as an optional accessory. Peened nonslip gripping surface available. |
_______________________________________________________
